10^th International Conference on Smart Materials & Nanotechnology March 23-24, 2022 London, UK

Chamil Abeykoon received the B.Sc. (Hons.) degree in mechanical engineering from the University of Peradeniya, Sri Lanka, in 2007, with the award of best performance in mechanical engineering, and the Ph.D. degree in mechanical engineering from the Queens University Belfast, U.K., in 2011, with several publications, in which one of his publications received the Young Author Best Paper Award from the IEEE in 2011. After completing the Ph.D. degree, he briefly worked as a Lecturer in Mechanical Engineering with the University of Peradeniya, Sri Lanka, a Research Fellow with the University of Bradford, U.K.,

Process monitoring, modeling, and control; and soft sensors and soft sensing; process instrumentation; renewable energy technologies; 3D printing, phase change materials; and heat transfer.

Prof.Dr. Ahmed Kadhim Hussein was born in Babylon City - Hilla - Iraq on 19 May 1974. Currently, he works as a professor in the Mechanical Engineering Department at the University of Babylon , Babylon City, Iraq. He received his Ph.D. in Mechanical Engineering from University of Al-Mustansiriya - Iraq in 2006. He awarded in 2018 the scientific excellence medal - First rank on Science and Technology from Ministry of Higher Education and Scientific Research – Iraq.

1-Supersonic Aerodynamics. 2-Non-Equilibrium Conduction Heat transfer. 3-Convection Heat Transfer. 4-Extended Irreversible Thermodynamics. 5-CFD. 6-Renewable Energy. 7-Nano Fluid Technology.

Elsayed Ahmed Elnashar,, Full-Professor of textiles Apparel, Kaferelsheikh University, Egypt. Born in 19 /8/1965. Have Ph.D. 2000, Msc.1995, Bsc.1989, Helwan University. Diploma1985advanced industrial textiles institute. He holds several academic administrative positions: Dean, Vice Dean, Head of Department, He has many textiles patents, Member of international scientific committees. Development of Faculties of Education, commissioned of Supreme Council of Egyptian Universities. Has design books published in Germany. Has published 136 scientific Articles. Founder and editor two scientific journals. And Smartex Conference Egypt. Member of the editorial board of several international magazines and conferences, He has made many scientific agreements with European &Africa universities

Antimicrobial Throw Volume Porosity -Membrane Technology for Filtrations: Water/Wastewater, Air Conditions, Cement Factory, Gas And Petroleum - Solar textiles (SOLATEX) of composite fabrics structures as alternative energy. - Functional Nano biodegradable - Computational Mathematics - Fluid Mechanics - Composites fabrics structures -Automotive of - Composites fabrics structures so airbags systems - Energy Effective Method of Modeling and Manufacturing - MULTISTITCHED 3D NANO COMPOSITE - Composites made of multilayered - Nanoart, and Nanotechnology in textiles and apparel branch. -improved simulating fitting cloth model of apparel surfaces.

Dr. Osman Adiguzel graduated from Department of Physics, Ankara University, Turkey in 1974 and received PhD- degree from Dicle University, Diyarbakir-Turkey. He studied at Surrey University, Guildford, UK, as a post doctoral research scientist in 1986-1987, and his studies focused on shape memory alloys. He worked as research assistant, 1975-80, at Dicle University and shifted to Firat University in 1980. He became professor in 1996, and he has already been working as professor. He published over 50 papers in international and national journals; He joined over 100 conferences and symposia in international and national level as participant, invited speaker or keynote speaker with contributions. He served the program chair or conference chair/co-chair in some of these activities. In particular, he joined in last six years (2014 - 2019) over 60 conferences as Speaker, Keynote Speaker and Conference Co-Chair organized by South Asian Institute of Science and Engineering (SAISE), web: http://saise.org/, Science and Engineering Institute (SCIEI), web: http://www.sciei.org, International Association of Computer Science and Information Technology, web: http://www.iacsit.org/, Scientific Federation, web: https://scientificfederation.com/, The Academic World Education and Research Center (AWER-Center), web: http://www.awer-center.org/, and other institutes and companies.

Scientific fields of Dr. Adiguzel are as follow: Shape memory effect and displacive phase transformations in shape memory alloys and other alloys, molecular dynamics simulations, alloy modeling, electron microscopy, electron diffraction, x-ray diffraction and crystallography.

Ephraim Suhir is on the faculty of the Portland State University, Portland, OR, USA, Technical University, Vienna, Austria and James Cook University, Queensland, Australia. He is also CEO of a Small Business Innovative Research (SBIR) ERS Co. in Los Altos, CA, USA, is Foreign Full Member (Academician) of the National Academy of Engineering, Ukraine (he was born in that country); Life Fellow of the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), the Society of Optical Engineers (SPIE), and the International Microelectronics and Packaging Society (IMAPS); Fellow of the American Physical Society (APS), the Institute of Physics (IoP), UK, and the Society of Plastics Engineers (SPE); and Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA). Ephraim has authored 400+ publications (patents, technical papers, book chapters, books), presented numerous keynote and invited talks worldwide, and received many professional awards, including 1996 Bell Laboratories Distinguished Member of Technical Staff (DMTS) Award (for developing effective methods for predicting the reliability of complex structures used in AT&T and Lucent Technologies products), and 2004 ASME Worcester Read Warner Medal (for outstanding contributions to the permanent literature of engineering and laying the foundation of a new discipline “Structural Analysis of Electronic Systems”). Ephraim is the third “Russian American”, after S. Timoshenko and I. Sikorsky, who received this prestigious award. This year he received the 2019 IEEE Electronic Packaging Society (EPS) Field award for seminal contributions to mechanical reliability engineering and modeling of electronic and photonic packages and systems and Int. Microelectronic Packaging Society’s (IMAPS) Lifetime Achievement award for making exceptional, visible, and sustained impact on the microelectronics packaging industry and technology.

the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers

Paolo Arosio is currently a fixed-term researcher at Physics Department of Universita’ degli Studi di Milano. His main research activity regards the magnetism of nanoparticles and magnetic materials, the morpho-dimensional studies on biological samples and porosity studies for Cultural Heritage materials at MIMA lab of the Physics Department, collaborating with numerous Italian and European research groups. Since 2011 P.A. is responsible of NMR experimental activity of his research group.

His research interests are in general in magnetism applied to material science and Nanomedicine. Within this framework, in his group they make use of NMR spectroscopy and relaxometry, magnetic fluid hyperthermia, SQUID magnetometry, Magnetic Resonance Imaging, Atomic Force Microscopy techniques. The systems of interest are magnetic nanoparticles (fundamental properties and applications), molecular nanomagnets, native biological systems (e.g. membranes) and so on.

John O Roberts has been an Open University Science Tutor for 30 years having attended Rutherford Appleton Lab and CERN as a summer school student. He has been a Freelance Tutor of Maths, Physics and Chemistry for many years and wrote the book “Those Infinities and the Periodic Table” over a period of 5 years from an idea in December 2010.

Materials Science and Chemistry

Ph.D. Rangel-Vázquez is a research at Instituto Tecnológico de Aguascalientes. Im level first in the National Researcher System at CONACYT in México. I have developed 15 projects in different areas such as: Drug delivery systems, hydrogels, biopolymers, simulations, materials science and mechanical engineering; published 3 books in molecular simulation, 50 papers, 50 conferences (Internationals and Nationals) and 12 books chapters. I have served as a reviewer for several journals: Journal of Applied Polymer Science, Materials Letters, Carbohydrate Polymers, Journal Polymer Engineering & Science, Thermochimica Acta, Journal of Molecular Structure, Journal of Surface and Coatings Technology, Academic Journal of Agricultural Research, World Journal of Engineering and Physical Sciences (WJEPS), Annual Research & Review in Biology, Journal of Applied Physical Science International, Global Conference on Polymer and Composite Materials 2015 and International Journal of Nanomedicine. I have worked in the Organizing of 12 International congress. I am on the Editorial Board of several journals including Journal of Pharmaceutics & Drug Development, Material Science and Engineering with Advanced Research, Journal of Nanomedicine Research, Nanomedicine Research Journal, Chemistry Journal, BAOJ Pharmaceutical Sciences (Bioaccent), Independent Journal of Managment & Production (Brazil) and Global Journal of Nanomedicine. I am Editor In Chief of BAOJ Pharmaceutical Sciences and the Journal of Pharmaceutics & Drug Development, respectively.

Nanotechnology applied to controlled drug delivery systems. In particular, skin and brain cancer, diabetes mellitus, antifungical, Design and preparation of oral solid (tablets and capsules) dosage forms, Analysis of drugs in pure forms, formulations and biological matrices, Bioadhesive drug delivery systems, especially hydrogels, polymers, biopolymers and IPNs, respectively.